Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Synthesis and effectiveness of overbased magnesium and calcium petroleum sulfonates

Journal Article · · Chem. Technol. Fuels Oils (Engl. Transl.); (United States)
DOI:https://doi.org/10.1007/BF00724162· OSTI ID:5374121

Overbased sulfonate additives are widely used to improve the service properties of motor oils. This paper describes the preparation of an overbased magnesium sulfonate additive from MSG-8 oil and an investigation of its functional properties. In experiments, the solution of ammonium sulfate, fat diluted with I-20A oil to a 38% concentration, was heated and stirred continuously in the presence of water and excess magnesium oxide for a period of 4 h at 80-120/degree/C while stripping out the liberated ammonia with nitrogen. The resulting oil solution of magnesium sulfonate was dissolved in toluene. The toluene solution after cleanup was held under vacuum to remove the solvent; the residue was an oil solution of overbased magnesium sulfonate. Their properties are tabulated. Comparative data are shown in Table 1 for a calcium sulfonate additive synthesized from the same intermediate (ammonium sulfate), using calcium hydroxide as the base. Test results on M-11 oil containing 5% of the magnesium or calcium additive are listed. It is shown that the magnesium additive gave better results from the calcium additive at the same concentration in terms of oxidation stability, corrosion properties, detergency, and dispersancy. 9 refs.

OSTI ID:
5374121
Journal Information:
Chem. Technol. Fuels Oils (Engl. Transl.); (United States), Journal Name: Chem. Technol. Fuels Oils (Engl. Transl.); (United States) Vol. 17:3-4; ISSN CTFOA
Country of Publication:
United States
Language:
English