Discrete element modeling of rock blasting in benches with joints and bedding planes - initial development
A Discrete element computer program named DMC (Distinct Motion Code) has been developed for modeling rock blasting. This program employs explicit time integration and uses spherical or cylindrical elements which are represented as circles in 2-D. DMC calculations have been compared with measurements on bench blasts in the field with relatively good comparison. Structural rock mass characteristics have a significant impact on any blast and DMC has not, until now, included these effects. This paper discusses a recently added DMC capability for treating joints and bedding planes in bench blast simulations. Material strength is treated in DMC by creating links between spheres to hold them together. The links can be broken based on any criterion; simple tension, compression and shear are currently employed. Joint sets are treated in DMC by defining the dip of each set toward or away from the bench face along with the joint spacing. Strength links that cross joint planes can have their strength properties modified or they can be deleted. Modification of the link patterns based on joint sets creates distinct blocks of spheres outlined by the intersecting joints. These blocks of spheres move together as a solid unit unless stress and strain conditions within the block indicate that links should be broken. Simulations using this capability show some blocks remaining intact throughout the blast and some being partially or completely broken. When this occurs, the joint pattern is shown to influence the characteristics of the blast. Upon completion of this capability both rock breakage and motion will be modeled during the same simulation. Much work remains to be done on this concept making this paper a progress report on the development of this new capability.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 53687
- Report Number(s):
- SAND-95-0839C; CONF-950247-2; ON: DE95011051; TRN: 95:004095
- Resource Relation:
- Conference: 21. annual conference on explosives and blasting techniques, Nashville, TN (United States), 5-9 Feb 1995; Other Information: PBD: [1995]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Computer modeling of gas flow and gas loading of rock in a bench blasting environment
Modeling Coal Seam Damage in Cast Blasting