Steam drying of wood chips in pneumatic conveying dryers

Journal Article · Wed Oct 01 04:00:00 EDT 1997 · Drying Technology

DOI:https://doi.org/10.1080/07373939708917326· OSTI ID:533025

Fyhr, C; Rasmuson, A ^[1]

---

1. Chalmers Univ. of Technology, Gothenburg (Sweden). Dept. of Chemical Engineering Design

A model for pneumatic conveying dryer is presented. Although the main emphasis is put on superheated steam drying of wood chips, it can be used for other porous materials as well. The model includes a comprehensive two-dimensional model for the drying of single wood chips which accounts for the main physical mechanisms occurring in wood during drying. The external drying conditions in a pneumatic conveying dryer were calculated by applying the mass, heat and momentum equations for each incremental step in dryer length. A plug flow assumption was made for the dryer model and the single particle and dryer models were solved in an iterative manner. The non-spherical nature of wood chips were accounted for by measuring the drag and heat transfer coefficients. Model calculations illustrate the complex interactions between steam, particles and walls which occur in a flash dryer. The drying rate varies in a very complex manner through the dryer. The internal resistance to mass transfer becomes very important in the drying of less permeable wood species such as spruce. Two effects were observed as the particle size was increased: firstly the heat transfer rate decreased, and secondly the residence time increased. To some extent, these effects compensate for each other, however, the net result is that larger chips have a higher final moisture content.

• Sponsoring Organization: USDOE
• OSTI ID: 533025
• Report Number(s): CONF-9607189--
• Journal Information: Drying Technology, Journal Name: Drying Technology Journal Issue: 6-8 Vol. 15; ISSN DRTEDQ; ISSN 0737-3937
• Country of Publication: United States
• Language: English

Related Subjects

09 BIOMASS FUELS
CONVEYORS
DRYERS
DRYING
ITERATIVE METHODS
MATHEMATICAL MODELS
PARTICLE SIZE
PNEUMATIC TRANSPORT
STEAM
TWO-DIMENSIONAL CALCULATIONS
WOOD WASTES