Formaldehyde surface-emission monitor
A formaldehyde surface emission monitor is under development for passive, non-destructive measurement of formaldehyde (CH/sub 2/O) emission rates from flat surfaces of solid CH/sub 2/O sources. The monitor utilizes a solid sorbent, 13X molecular sieve, that provides excellent chemical stability for sorbed CH/sub 2/O and permits the monitor to be used in any physical orientation. With a 0.032 m/sup 2/ test area, a approx. = 0.01 mg CH/sub 2/O/m/sup 2/.hr detection limit can be achieved with a 3-hr sampling period and pararosaniline colorimetric analysis. Preliminary results indicate that the monitor could be used for (1) quality control measurements of commercial CH/sub 2/O resin-containing materials such as pressed-wood products, and (2) in-situ measurements of CH/sub 2/O emission rates from a variety of CH/sub 2/O sources in domestic environments such as pressed-wood, textiles, and urea-formaldehyde foam insulation products.
- Research Organization:
- Oak Ridge National Lab., TN (USA)
- DOE Contract Number:
- W-7405-ENG-26
- OSTI ID:
- 5305813
- Report Number(s):
- CONF-820567-1; ON: DE82015398
- Resource Relation:
- Conference: National symposium on recent advances in pollutant monitoring in ambient air and stationary sources, Raleigh, NC, USA, 4 May 1982
- Country of Publication:
- United States
- Language:
- English
Similar Records
Surface emission monitoring of formaldehyde resin-containing products
Formaldehyde surface emission monitor
Related Subjects
FORMALDEHYDE
AIR POLLUTION MONITORS
INDOOR AIR POLLUTION
MONITORING
COMMERCIAL BUILDINGS
DESIGN
INDUSTRIAL PLANTS
RESIDENTIAL BUILDINGS
AIR POLLUTION
ALDEHYDES
BUILDINGS
MEASURING INSTRUMENTS
MONITORS
ORGANIC COMPOUNDS
POLLUTION
500200* - Environment
Atmospheric- Chemicals Monitoring & Transport- (-1989)