Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Production of liquid hydrocarbon fuels from peat

Journal Article · · Energy and Fuels; (USA)
DOI:https://doi.org/10.1021/ef00008a023· OSTI ID:5279993
;  [1]; ;  [2];  [3]
  1. Battelle, Pacific Northwest Lab., Richland, WA (USA)
  2. Univ. of Waterloo, Ontario (Canada)
  3. Fuels and Lubricants Laboratory, Espoo (Finland)
A recent report from the Direct Biomass Liquefaction Cooperative Project (jointly sponsored under the International Energy Agency (IEA), Bioenergy Agreement, by the governments of Canada, Finland, Sweden, and the United States) concluded that atmospheric pressure flash pyrolysis was a cost effective and technically feasible method for the production of liquid fuels from wood and peat. However, further processing of the crude liquid products was needed to produce marketable fuels (gasoline or diesel). Research has progressed rapidly in the case of wood-derived fuels, and two types of processing have now been reported for the production of gasoline-range hydrocarbons from wood pyrolyzates. Peat processing has received less emphasis, but be are no able to report that the conversion of peat to gasoline-range hydrocarbons has been accomplished. The conversion process described in this communication is essentially a two-step process. First, dried peat is pyrolyzed to produce a high yield of tar, and second, the peat tar is catalytically hydrotreated to produce hydrocarbons.
OSTI ID:
5279993
Journal Information:
Energy and Fuels; (USA), Journal Name: Energy and Fuels; (USA) Vol. 2:2; ISSN 0887-0624; ISSN ENFUE
Country of Publication:
United States
Language:
English