Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Improved eddy-current inspection for steam generator tubing

Conference ·
OSTI ID:5273645
Computer programs have been written to allow the analysis of different types of eddy-current probes and their performance under different steam generator test conditions. The probe types include the differential bobbin probe, the absolute bobbin probe, the pancake probe and the reflection probe. The generator test conditions include tube supports, copper deposits, magnetite deposits, denting, wastage, pitting, cracking and IGA. These studies are based mostly on computed values, with the limited number of test specimens available used to verify the computed results. The instrument readings were computed for a complete matrix of the different test conditions, and then the test conditions determined as a function of the readings by a least-squares technique. A comparison was made of the errors in fit and instrument drift for the different probe types. The computations of the change in instrument reading due to the defects have led to an inversion'' technique in which the defect properties can be computed from the instrument readings. This has been done both experimentally and analytically for each of these probe types. 3 refs., 13 figs., 1 tab.
Research Organization:
Oak Ridge National Lab., TN (USA)
Sponsoring Organization:
NRC
DOE Contract Number:
AC05-84OR21400
OSTI ID:
5273645
Report Number(s):
CONF-8910222-7; ON: DE90003705; CNN: DOE-1886-8041-7B
Country of Publication:
United States
Language:
English