Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Solid State Track Recorder fission rate measurements in low power light water reactor pressure vessel mockups

Conference ·
OSTI ID:5251904
The results of extensive SSTR measurements made at the Pool Critical Assembly (PCA) facility at Oak Ridge National Laboratory have been reported previously. Measurements were made at key locations in PCA which is an idealized mockup of the water gap, thermal shield, pressure vessel geometry of a light water reactor. Recently, additional SSTR fission rate measurements have been carried out for 237-Np, 238-U, and 235-U in key locations in the NESTOR Shielding and Dosimetry Improvement Program (NESDIP) mockup facility located at Winfrith, England. NESDIP is a replica of the PCA facility, and comparisons will be made between PCA and NESDIP measurements. The results of measurements made at the engineering mockup at the VENUS critical assembly at CEN/SCK, Mol, Belgium will also be reported. Measurements were made at selected radial and azimuthal locations in VENUS, which models the in-core and near-core regions of a pressurized water reactor. Comparisons of absolute SSTR fission rates with absolute fission rates made with the Mol miniature fission chamber will be reported. Absolute fission rate comparisons have also been made between the NBS fission chamber, radiometric fission foils, and SSTRs, and these results will be summarized.
Research Organization:
Hanford Engineering Development Lab., Richland, WA (USA); Centre d'Etude de l'Energie Nucleaire, Mol (Belgium); National Bureau of Standards, Washington, DC (USA). Center for Radiation Research; UKAEA Atomic Energy Establishment, Winfrith
DOE Contract Number:
AC06-76FF02170
OSTI ID:
5251904
Report Number(s):
HEDL-SA-3316-FP; CONF-850933-9; ON: TI87000249
Country of Publication:
United States
Language:
English