Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Application of CIS of high-efficiency PV module fabrication. Annual technical progress report, April 1, 1996--March 31, 1997

Technical Report ·
DOI:https://doi.org/10.2172/525024· OSTI ID:525024
; ;  [1]
  1. International Solar Electric Technology, Inglewood, CA (United States); and others

This is the Phase II Annual Technical Report of the subcontract titled {open_quotes}Application of CIS to High Efficiency PV Module fabrication.{close_quotes} The general objectives of the program are the development of a novel, non-vacuum process for CIS film deposition, optimization of the various layers forming the CIS device structure, and fabrication of high efficiency submodules. The specific goals of the project are the development of 13% efficient small area cells and 10% efficient submodules using a novel, low-cost CIS deposition approach. During this research period, the authors concentrated their efforts on three different areas of research. Within the National CIS Partnership Program, they participated in the {open_quotes}substrate/Mo interactions{close_quotes} working group and investigated issues such as Na diffusion from the soda-lime glass substrate into the Mo layers and CIS films. It was determined that the Na content within the Mo layers was not a strong function of the nature of the Mo film. However, diffusion through the Mo layers was found to be a function of the Mo film characteristics as well as a very strong function of the CIS growth process. Na was found to be on the grain boundaries in Mo and CIS layers.

Research Organization:
National Renewable Energy Lab., Golden, CO (United States)
Sponsoring Organization:
USDOE Assistant Secretary for Energy Efficiency and Renewable Energy, Washington, DC (United States)
DOE Contract Number:
AC36-83CH10093
OSTI ID:
525024
Report Number(s):
NREL/SR--520-23444; ON: DE97008781
Country of Publication:
United States
Language:
English