Fatigue prediction based on computational fracture mechanics
- Stevens Inst. of Tech., Hoboken, NJ (United States). Dept. of Mechanical Engineering
A general numerical method has been developed to predict fatigue crack initiation and fatigue crack propagation under cyclic loads. Finite element technique is employed to model specimen geometry. The method requires uniaxial stress/strain material data only; empirical fatigue constants are not required. It determines the number of load cycles for crack initiation or for crack propagation based on fracture energy, W, and dissipated energy per cycle, E. Fracture energy is the plastic-strain energy contained in a Dugdale-type cohesive stress zone located near an initial defect. The size of the cohesive zone of a specimen is established by a computational procedure that simulates elastic-plastic fracture under static loading. Dissipated energy per cycle is the plastic-strain energy in a hysteresis loop that exhibits cyclically stable behavior after shake-down. The number of cycles to initiate a crack or to propagate a crack to a finite amount is obtained by dividing the fracture energy, W, by the dissipated energy per cycle, E. Verification examples showing stress amplitude versus number of cycles (S-N diagram) are compared with experimental results. Also, experimental crack growth rate as a function of stress intensity factor (Paris-type equation) is compared with calculated results based on this method. Fatigue constants based on experimental data were not required in the computations. Limited comparison of predicted cycles to experimental results indicates good correlation. This work is significant in that it suggests a new and improved approach to problems of fatigue. Since fatigue behavior can be predicted using only uniaxial material tensile data, it holds out the promise of a reduced need for experimental work in the future.
- OSTI ID:
- 522435
- Report Number(s):
- CONF-940517-; TRN: IM9739%%156
- Resource Relation:
- Conference: 3. symposium on advances in fatigue lifetime predictive techniques, Montreal (Canada), 16-17 May 1994; Other Information: PBD: 1996; Related Information: Is Part Of Advances in fatigue lifetime predictive techniques. Volume 3; Mitchell, M.R. [ed.] [Rockwell Science Center, Thousand Oaks, CA (United States)]; Landgraf, R.W. [ed.] [Virginia Polytechnic Institute and State Univ., Blacksburg, VA (United States)]; PB: [355] p.; ASTM STP 1292
- Country of Publication:
- United States
- Language:
- English
Similar Records
Deformation fields near a steady fatigue crack with anisotropic plasticity
Sensitivity of polycrystal plasticity to slip system kinematic hardening laws for Al 7075-T6