Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Preliminary results from initial in-pile debris bed experiments. [LMFBR]

Conference ·
OSTI ID:5197687
An accident in a liquid metal fast breeder reactor (LMFBR) in which molten core material is suddenly quenched with subcooled liquid sodium could result in extensive fragmentation and dispersal of fuel as subcritical beds of frozen particulate debris within the reactor vessel. Since this debris will continue to generate power due to decay of retained fission products, containment of the debris is threatened if the generated heat is not removed. Therefore, the initial safety question is the capacity which debris beds may have for transfer of the decay heat to overlying liquid sodium by natural processes--i.e., without the aid of forced circulation of the coolant. Up to the present time, all experiments on debris bed behavior either have used substitute materials (e.g., sand and water) or have employed actual materials, but atypical heating methods. Increased confidence in the applicability of debris bed simulations is afforded if the heat is generated within the fuel component of the appropriate fast reactor materials. The initial series of in-pile tests reported on herein constitutes the first experiments in which the internal heating mode has been produced in particulate oxide fuel immersed in liquid sodium. Fission heating of the fully-enriched UO/sub 2/ in the experiment while it is contained within Sandia Laboratories Annular Core Pulse Reactor (ACPR), operating in its steady-state mode, approximates the decay heating of debris. Preliminary results are discussed.
Research Organization:
Sandia Labs., Albuquerque, N.Mex. (USA)
DOE Contract Number:
EY-76-C-04-0789
OSTI ID:
5197687
Report Number(s):
SAND-77-1828C; CONF-771109-62
Country of Publication:
United States
Language:
English