Optimal point-to-point motion control of robots with redundant degrees of freedom
Control of a kinematically redundant robot arm requires an optimization procedure to determine the motion of the end effector. The criterion for optimization can be minimum motion time, minimum joint displacement increments or a combined merit function specified according to the requirements of the user. Three different methods may be used to perform the computations and obtain the joint coordinate increments for the point-to-point motion control of the robot. The methods are the ''direct,'' the ''pseudoinverse'' and the ''generalized inverse'' methods. These methods are described in detail in this paper, and results obtained with the three methods are compared on the basis of performing simulated tasks. It is concluded that the generalized inverse method is the most suitable, general method for point-to-point control of robots with more than six degrees-of-freedom.
- Research Organization:
- Dept. of Mechanical Engineering, Univ. of Toronto, Toronto, Ontario
- OSTI ID:
- 5197220
- Journal Information:
- J. Eng. Ind.; (United States), Journal Name: J. Eng. Ind.; (United States) Vol. 108:2; ISSN JEFIA
- Country of Publication:
- United States
- Language:
- English
Similar Records
Self-motion determination based on joint velocity bounds for redundant robots
An efficient gradient projection optimization scheme for a seven-degree-of-freedom redundant robot with spherical wrist
Related Subjects
320303* -- Energy Conservation
Consumption
& Utilization-- Industrial & Agricultural Processes-- Equipment & Processes
42 ENGINEERING
420203 -- Engineering-- Handling Equipment & Procedures
CALCULATION METHODS
CONTROL THEORY
EQUIPMENT
INDUSTRIAL PLANTS
LABORATORY EQUIPMENT
MANIPULATORS
MATERIALS HANDLING EQUIPMENT
MOTION
OPTIMIZATION
REMOTE HANDLING EQUIPMENT
ROBOTS
TIME DEPENDENCE