The determination of the isothermal section at 1200K of the Cr-Ni-Ti phase diagram
- Central South Univ. of Technology, Changsha (China). Dept. of Materials Science and Engineering
Little information for the phase equilibria in the ternary system Cr-Ni-Ti is available, and the phase relationships in isothermal section are uncertain. Taylor presented two determined isothermal sections at 750 C and 1,000 C for the Ni-corner. Kornilov et al. reported the solubility of Ti in Ni varying with temperature under the condition of constant Cr content (10 at% and 20 at% Cr respectively). Gupta et al. proposed a schematic liquidus projection diagram. Kaufman calculated three isothermal sections (1,300, 1,550 and 1,625 K) of the system Cr-Ni-Ti. All in all, the experimental data for the system are rather sparse. The purpose of the present work is to gain experimental information of the isothermal section at 1,200K in the system Cr-Ni-Ti by means of a diffusion triple technique.
- OSTI ID:
- 516845
- Journal Information:
- Scripta Materialia, Vol. 37, Issue 2; Other Information: PBD: 15 Jul 1997
- Country of Publication:
- United States
- Language:
- English
Similar Records
Estimation of isothermal sections of ternary phase diagrams of lithium containing systems: the Al--Li--Mg system
Predicting Phase Diagram of the CaCl2-H2O Binary System from the BET Adsorption Isotherm