Limitations of interaction-point spot-size tuning at the SLC
At the Stanford Linear Collider (SLC), the interaction-point spot size is minimized by repeatedly correcting, for both beams, various low-order optical aberrations, such as dispersion, waist position or coupling. These corrections are performed about every 8 hours, by minimizing the IP spot size while exciting different orthogonal combinations of final-focus magnets. The spot size itself is determined by measuring the beam deflection angle as a function of the beam-beam separation. Additional information is derived from the energy loss due to beamstrahlung and from luminosity-related signals. In the 1996 SLC run, the typical corrections were so large as to imply a 20-40% average luminosity loss due to residual uncompensated or fluctuating tunable aberrations. In this paper, the authors explore the origin of these large tuning corrections and study possible mitigations for the next SLC run.
- Research Organization:
- SLAC National Accelerator Lab., Menlo Park, CA (United States)
- Sponsoring Organization:
- USDOE Office of Energy Research, Washington, DC (United States)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 513538
- Report Number(s):
- SLAC-PUB-7509; CONF-970503-183; ON: DE97006826; TRN: 97:014563
- Resource Relation:
- Conference: 17. IEEE particle accelerator conference, Vancouver (Canada), 12-16 May 1997; Other Information: PBD: May 1997
- Country of Publication:
- United States
- Language:
- English
Similar Records
Orthogonality of final waist corrections at the IP of the SLC
Individual Beam Size And Length Measurements at the SLC Interaction Point Derived From the Beam Energy Loss During a Beam Beam Deflection Scan