Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Pre-eutectic densification in MgF/sub 2/-CaF/sub 2/

Conference ·
OSTI ID:5133972
Increased densification rates were found as much as 200/sup 0/C below the eutectic temperature (980/sup 0/C) for MgF/sub 2/ containing small amounts of CaF/sub 2/. Constant heating rate and constant temperature sintering data, as well as microstructural developments indicated that solid state grain-boundary transport rates had been enhanced by the eutectic forming additive. The effect saturated at about 1 wt % CaF/sub 2/. The results suggest that densification of ceramic powders could be favorably affected without a substantial increase in the grain growth rate, by the addition of small amounts of eutectic forming additives, and sintering below the eutectic temperature. 6 figures.
Research Organization:
Lawrence Berkeley Lab., CA (USA)
DOE Contract Number:
W-7405-ENG-48
OSTI ID:
5133972
Report Number(s):
LBL-12849-Rev.; CONF-820638-2-Rev.; ON: DE82015750
Country of Publication:
United States
Language:
English