Regenerative flywheel storage system. Volume II. Final report
This report describes the development, fabrication, and test of a regenerative flywheel energy storage and recovery system for a battery/flywheel electric vehicle of the 3000-lb class. The vehicle propulsion system was simulated on a digital computer in order to determine the optimum system operating strategies and to establish a calculated range improvement over a nonregenerative, all-electric vehicle. Fabrication of the inductor motor, the flywheel, the power conditioner, and the system control are described. Test results of the system operating over the SAE J227a Schedule D driving cycle are given and are compared to the calculated value. The flywheel energy storage system consists of a solid rotor, synchronous, inductor-type, flywheel drive machine electrically coupled to a d-c battery electric propulsion system through a load-commutated inverter. The motor/alternator unit is coupled mechanically to a small steel flywheel which provides a portion of the vehicle's accelerating energy and regenerates the vehicle's braking energy. Laboratory simulation of the electric vehicle propulsion system includes a 108-volt, lead-acid battery bank and a separately excited d-c propulsion motor coupled to a flywheel and generator which simulate the vehicle's inertia and losses. This volume reports the theoretical and experimental studies which were performed and the results of these studies.
- Research Organization:
- General Electric Co., Schenectady, NY (USA). Corporate Research and Development Dept.
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 5132567
- Report Number(s):
- UCRL-15290(Vol.2); SRD-79-148-2
- Country of Publication:
- United States
- Language:
- English
Similar Records
Regenerative flywheel energy storage system. Volume I. Executive summary
Regenerative flywheel energy storage system. Volume III. Life-cycle and cost-benefit analysis of a battery-flywheel electric car
Related Subjects
330300* -- Advanced Propulsion Systems-- Electric-Powered Systems
330400 -- Advanced Propulsion Systems-- Hybrid Systems
330500 -- Advanced Propulsion Systems-- Flywheel Propulsion
COMPUTERIZED SIMULATION
CONTROL EQUIPMENT
DATA
DESIGN
ELECTRIC GENERATORS
ELECTRIC-POWERED VEHICLES
ENERGY STORAGE
EQUIPMENT
EXPERIMENTAL DATA
FABRICATION
FEASIBILITY STUDIES
FLYWHEEL ENERGY STORAGE
FLYWHEEL-POWERED VEHICLES
HYBRID ELECTRIC-POWERED VEHICLES
INFORMATION
NUMERICAL DATA
PERFORMANCE TESTING
RESEARCH PROGRAMS
SIMULATION
STORAGE
TESTING
VEHICLES