Condensing heat transfer enhancement on vertical spiral double fin tubes with drainage gutters

Journal Article · Thu Aug 01 04:00:00 EDT 1985 · J. Sol. Energy Eng.; (United States)

DOI:https://doi.org/10.1115/1.3267682· OSTI ID:5127177

Takazawa, H; Kajikawa, T

Spiral double-fin tubes with drainage gutters are proposed for a vertical condenser to achieve high-condensing heat transfer performance for ocean thermal energy conversion application. There aluminum tubes have 5 or 10 spiral primary fins per pitch of spiral drainage fin. The condensation occurs mainly on the 0.8-mm-high primary fins; the 2-mm-high drainage fin collects the condensate from the primary fins, and a vertical drainage gutter removes the condensate from the drainage fin. Thus performance degradation due to accumulation of condensate in the vertical direction is avoided. Experiments were carried out using R-22 (chlorodifluromethane) as the working fluid in a shell using seven aluminum tubes (900 mm in effective length and 20 mm in nominal diameter). The drainage fin pitch, the primary fin pitch, shape of primary fin, and number of drainage gutters per tube were selected as parameters. One of the tubes had a 0.2-mm-thick titanium cladding on the inside (water side). The measured working-fluid-side condensing heat transfer coefficients for these tubes were four to six times those for a smooth tube based on the outer surface area.

• Research Organization: AIST, Sakura-mura, Niihari-gun, Ibaraki
• OSTI ID: 5127177
• Journal Information: J. Sol. Energy Eng.; (United States), Journal Name: J. Sol. Energy Eng.; (United States) Vol. 107:3; ISSN JSEED
• Country of Publication: United States
• Language: English

Related Subjects

14 SOLAR ENERGY
140800* -- Solar Energy-- Ocean Energy Systems
ALUMINIUM
EFFICIENCY
ELEMENTS
ENERGY TRANSFER
FINS
HEAT EXCHANGERS
HEAT TRANSFER
METALS
OCEAN THERMAL POWER PLANTS
PERFORMANCE
POWER PLANTS
SOLAR POWER PLANTS
THERMAL ANALYSIS
THERMAL EFFICIENCY
THERMAL POWER PLANTS
TUBES