Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

An alarm multiplexer communication system

Conference · · Nucl. Mater. Manage. Annu. Meet. Proc.; (United States)
OSTI ID:5119468

A low cost Alarm Multiplexer Communication System (AMCS) has been developed to perform the security sensor monitoring and control functions and to provide remote relay control capability for integrated security systems. AMCS has a distributed multiplexer/repeater architecture with up to four dual communication loops and dual control computers that guarantee total system operation under any single point failure condition. Each AMCS can control up to 4096 sensors and 2048 remote relays. AMCS reports alarm status information to and is controlled by either one or two Host computers. This allows for independent operation of primary and backup security command centers. AMCS communicates with the Host computers over an asynchronous serial communication link and has a message protocol which allows AMCS to fully recover from lost messages or large blocks of data communication errors. This paper describes the AMCS theory of operation, AMCS fault modes, and AMCS system design methodology. Also, cost and timing information is presented. AMCS is being used and considered for several DOE and DOD facilities.

Research Organization:
Sandia National Labs., Albuquerque, NM 87185
OSTI ID:
5119468
Report Number(s):
CONF-860654-
Journal Information:
Nucl. Mater. Manage. Annu. Meet. Proc.; (United States), Journal Name: Nucl. Mater. Manage. Annu. Meet. Proc.; (United States) Vol. 15; ISSN NUMMB
Country of Publication:
United States
Language:
English