Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Coal water mixture development. Quarterly technical progress report

Technical Report ·
OSTI ID:5110685
Five runs with the Spi-Wear radio-assay system to measure material losses of irradiated pipe components were completed in August 30, 1985. The Spi-Wear system is an in-situ real-time monitoring technique that would provide important information concerning the nature and dynamics of coal-water mixtures (CWM) corrosion/erosion. CWM from the fourth delivery of the long term test slurry was utilized in all five runs. This slurry remained extremely stable when recirculated in the test loop with the progressive cavity pump during all five runs. Assessment of the corrosion/erosion data collected in the CWM test loop using wear plugs and corrosometer probes indicates very little corrosion/erosion during the long term tests. Typical corrosion/erosion rates for carbon steel were less than 10 mils per year, or comparable to rates caused by water corrosion. Metallographic examination of selected test coupons and wear plugs also revealed lack of corrosion for a carbon steel test coupon placed in a static CWM environment, and only limited pitting corrosion on carbon steel test coupons and wear plugs placed in the CWM test loop. The calculated corrosion rate for these test coupons and wear plugs is approximately 5 mils per year. The plans for next quarter are to disassemble selected plant components for detailed inspection, and to continue evaluation of the data collected during the long term equipment performance tests. 17 figs.
Research Organization:
TRW Space and Technology Group, Redondo Beach, CA (USA)
DOE Contract Number:
AC22-82PC50270
OSTI ID:
5110685
Report Number(s):
DOE/PC/50270-T12; ON: DE86002495
Country of Publication:
United States
Language:
English