skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A comparison of continuous pneumatic nebulization and flow injection-direction injection nebulization for sample introduction in inductively coupled plasma-mass spectrometry

Technical Report ·
DOI:https://doi.org/10.2172/510295· OSTI ID:510295

Samples containing Ni, Cd, Pb, and U were analyzed eighteen times over a two-month period using inductively coupled plasma-mass spectrometry (ICP-MS). Sample introduction was accomplished by either flow injection-direct injection nebulization (FI-DIN) or continuous pneumatic nebulization (CPN). Using comparable instrumental measurement procedures, FI-DIN analyses were 33% faster and generated 52% less waste than CPN analyses. Instrumental limits of detection obtained with FI-DIN and CPN were comparable but not equivalent (except in the case of Pb) because of nebulizer-related differences in sensitivity (i.e., signal per unit analyte concentration) and background. Substantial and statistically significant differences were found between FI-DIN and CPN Ni determinations, and in the case of laboratory waste samples, there were also small but statistically significant differences between Cd determinations. These small (2 to 3%) differences were not related to polyatomic ion interference (e.g., {sup 95}Mo{sup 16}O{sup +}), but in light of the time and waste savings to be realized, they should not preclude the use of FI-DIN in place of CPN for determination of Cd, Pb, U, and similar elements present at trace concentrations.

Research Organization:
Argonne National Lab. (ANL), Argonne, IL (United States)
Sponsoring Organization:
USDOE Office of Energy Research, Washington, DC (United States)
DOE Contract Number:
W-31109-ENG-38
OSTI ID:
510295
Report Number(s):
ANL/CMT/PP-87817; ON: DE97008110; TRN: AHC29717%%7
Resource Relation:
Other Information: PBD: [1997]
Country of Publication:
United States
Language:
English