Numerical and experimental study of the indentation hardness test
The process of indentation hardness testing has been analyzed both experimentally and numerically. A set of indentation experiments has been performed for several materials with conical/pyramidal and spherical indenters. The large strain elastoplastic finite element program JAC has been used, with tensile stress-strain data as input, to model these tests as well as tests reported in the literature. Load-depth curves generated with our finite element model deviate less than 15% from experimental data (both our own as well as literature values) for both large scale (up to 250 ..mu..m depth) and small scale (less than 5 ..mu..m depth) indentation tests for all indenter geometries examined. Also, agreement between the model and micro-micro (less than 1 ..mu..m) pyramid indentation data from the literature is quite good. These results suggest that load-depth response of indentation hardness tests can be successfully predicted with a continuum based finite element model. In addition, examination of the finite element results has suggested several corrections based on geometry which must be included when computing the hardness of near surface material.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (USA)
- DOE Contract Number:
- AC04-76DP00789
- OSTI ID:
- 5101710
- Report Number(s):
- SAND-85-0486; ON: DE86002095
- Country of Publication:
- United States
- Language:
- English
Similar Records
A LOAD-BASED DEPTH-SENSING INDENTATION TECHNIQUE FOR ELASTIC–PLASTIC MATERIAL MECHANICAL PROPERTY EVALUATION
An ultra-micro indentation investigation of aspects of the fracture process in particulate reinforced metal matrix composites