Analysis of nanometer-scale precipitation in a rapidly solidified stainless steel
- Univ. of Wisconsin, Madison, WI (United States). Dept. of Materials Science and Engineering
- Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.
The authors have rapid-solidification-processed many stainless steels by gas atomization and achieved strength improvements of over 50% relative to conventionally-processed stainless steels with concomitant improvement in corrosion and oxidation behavior. These strength improvements are most pronounced after aging treatments when elevated concentrations of oxygen and vanadium are present in the stainless steel. An austenitic (FCC) stainless steel was prepared by gas atomization and consolidated by hot extrusion at 900 C. These specimens were heat treated for 1 hour at 1,000 C and aged at 600 C for 500 hours. The microstructure of each alloy composition was observed in TEM with bright field imaging. After aging, most alloys showed the same precipitate morphology as before aging. An obvious change, however, was found only in the alloy with highest oxygen content. A high number density of 15 to 20 nm diameter precipitates was measured in this alloy. Moreover, with weak-beam dark field imaging, a very high number density of coherent, 6 to 10 nm diameter precipitates is observed throughout the matrix by Moire fringe contrast. An atom probe field ion microscopy (APFIM) investigation showed that FIM provides high contrast imaging the precipitates. In order to get a more global view of the structure, energy-filtered composition imaging on a LEO EM 912 was used to map the oxygen and nitrogen in carbon extraction replicas of the aged specimens. These images confirm that the 18 nm precipitates are oxides, however, it appears that the 8 nm precipitates are not extracted.
- Research Organization:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- USDOE Office of Energy Research, Washington, DC (United States)
- DOE Contract Number:
- AC05-96OR22464
- OSTI ID:
- 505350
- Report Number(s):
- CONF-970834-11; ON: DE97005256; TRN: AHC29716%%102
- Resource Relation:
- Conference: Microscopy and Microanalysis `97, Cleveland, OH (United States), 10-14 Aug 1997; Other Information: PBD: 21 Mar 1997
- Country of Publication:
- United States
- Language:
- English
Similar Records
Microstructural evolution in a 17-4 PH stainless steel after aging at 400 C
Molybdenum solubility differences in MC phases formed in titanium and niobium modified austenitic stainless steels determined using AEM