Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

PCB trial burn in a modular, movable incinerator

Conference · · Proceedings, Annual Meeting, Air Pollution Control Association; (USA)
OSTI ID:5051007
 [1];  [2]
  1. ENSCO Environmental Services, Franklin, TN (US)
  2. Environmental Systems Co., Little Rock, AR (US)
The authors discuss a trial burn conducted from March 11-13, 1986, in El Dorado, Arkanasas, of an MWP-2000 Modular Incinerations system to destroy PCB liquids, PCB items and PCB-contaminated solids in conformance with TSCA requirements. MWP-2000 has 4 main process modules--Rotary kiln, capable of destroying liquid PCBs and PCB-contaminated dirt; secondary combustor, capable of destroying high-level PCB liquids; heat recovery system, generating steam to drive the system's prime mover; and pollution control system that removes acid gases and fine particulates from the gas stream. The trial burn consisted of 5 separate tests. The first 3 tests were replicate tests. In these tests PCB-contaminated soils, having a PCB content of 1.8%, and PCB-contaminated fuel, having a content of 60%, were burned simultaneously in the secondary combustor. In the fourth test, PCB liquids, having a PCB content of 61%, were burned in the secondary combustor while the kiln was not operated. In the fifth test, pre-shredded capacitors having a PCB content of 18% were fed to the kiln and PCB liquids having a PCB concentration of 64% were fed to the secondary combustor. Trial burn results clearly demonstrate that a DREs of 99.999999% were achieved. HCl removal efficiencies of 99.9% were achieved. Total particulate emissions of 0.01-0.02 gr/DSCF were achieved. PCB contamination in the kiln ash and effluent residuals of <2 ppm were achieved.
OSTI ID:
5051007
Report Number(s):
CONF-870695--
Conference Information:
Journal Name: Proceedings, Annual Meeting, Air Pollution Control Association; (USA) Journal Volume: 1
Country of Publication:
United States
Language:
English