Noncyanide cadmium plating baths. Final report
Technical Report
·
OSTI ID:5008734
One approach to minimizing toxic wastes is to eliminate the use of cyanide plating baths. Non-cyanide zinc plating baths have been successfully developed and have found widespread use. An investigation was conducted in an attempt to accomplish similar results with cadmium plating baths. The focus of this study was on additives to a near neutral cadmium bath, free of complexing agents. A Hull cell was used to enable visualization of deposits over a broad range of cathode current densities. Experimental design (Taguchi Method) was used to optimize bath parameters and constituent concentrations. Bath parameters have been developed which indicate promise for producing dense deposits with good covering power, and relatively low tendency for hydrogen embrittlement.
- Research Organization:
- Naval Air Development Center, Warminster, PA (United States). Air Vehicle and Crew Systems Technology Dept.
- OSTI ID:
- 5008734
- Report Number(s):
- AD-A-250610/3/XAB; NADC--91114-60
- Country of Publication:
- United States
- Language:
- English
Similar Records
Cadmium plating replacements
Selective determination of copper, zinc, and cadmium cyanide complexes in plating baths by spectrophotometric titration
A NEW LOOK AT THE HYDROGEN EMBRITTLEMENT OF CADMIUM COATED HIGH STRENGTH STEELS. Period covered : January 1956 to May 1958
Conference
·
Tue Feb 28 23:00:00 EST 1995
·
OSTI ID:102020
Selective determination of copper, zinc, and cadmium cyanide complexes in plating baths by spectrophotometric titration
Journal Article
·
Sat Jan 31 23:00:00 EST 1987
· Ind. Lab. (Engl. Transl.); (United States)
·
OSTI ID:6293939
A NEW LOOK AT THE HYDROGEN EMBRITTLEMENT OF CADMIUM COATED HIGH STRENGTH STEELS. Period covered : January 1956 to May 1958
Technical Report
·
Thu Nov 13 23:00:00 EST 1958
·
OSTI ID:4286738
Related Subjects
36 MATERIALS SCIENCE
360101* -- Metals & Alloys-- Preparation & Fabrication
ADDITIVES
CADMIUM
CORROSION RESISTANCE
DEPOSITION
ELECTRODEPOSITION
ELECTROLYSIS
ELECTROPLATING
ELEMENTS
EMBRITTLEMENT
HYDROGEN EMBRITTLEMENT
INDUSTRIAL WASTES
LYSIS
MANAGEMENT
METALS
PLATING
SURFACE COATING
WASTE MANAGEMENT
WASTES
360101* -- Metals & Alloys-- Preparation & Fabrication
ADDITIVES
CADMIUM
CORROSION RESISTANCE
DEPOSITION
ELECTRODEPOSITION
ELECTROLYSIS
ELECTROPLATING
ELEMENTS
EMBRITTLEMENT
HYDROGEN EMBRITTLEMENT
INDUSTRIAL WASTES
LYSIS
MANAGEMENT
METALS
PLATING
SURFACE COATING
WASTE MANAGEMENT
WASTES