Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

NET-1.2 post-irradiation examination report

Technical Report ·
DOI:https://doi.org/10.2172/491383· OSTI ID:491383

The post-irradiation examination (PIE) of the NET-1.2 fuel element was completed in December, 1993. The goal of the PIE work was to gather data regarding the fracture of the hot frit during the experiment. Five cracks were observed in the hot frit at various locations although only two were believed to have initiated the overall component failure. These two cracks were complete circumferential failures and were located near the open and closed ends of the frit within the active flow region. The location and orientation of these fractures suggested that failure was the result of thermally-induced stresses that exceeded pre-test predictions. The cause of the failure was the temperature difference between the coolant flowing through the hot frit and the thermally massive end fittings. The resulting axial temperature gradients in the hot frit imposed thermal stresses that exceeded failure in the frit coating material. This coating fracture then propagated through the graphite substrate. Post-test analyses of the frit response based on measured data from the experiment verified that the frit coating failure stresses were exceeded. Additionally, the cold frit behaved unexpectedly. The PIE inspection of this component showed that a majority of the compliant panels were permanently deformed against the cold frit inner wall even though the transients that the bed was exposed to were not thought to be capable of creating this magnitude of bed expansion. No evidence of bed locking was observed. A calculational error in the prediction of the total bed expansion was found (post-PIE) which certainly contributed to the underestimation of the bed displacement. Additionally, temperature differences between the bulk of the frit and the panels created a bowing force which may have allowed some amount of bed settling at relatively low temperatures while particle thermal expansion was minimal.

Research Organization:
Sandia National Labs., Albuquerque, NM (United States)
Sponsoring Organization:
Department of Defense, Washington, DC (United States)
DOE Contract Number:
AC04-94AL85000
OSTI ID:
491383
Report Number(s):
SAND--94-1261; ON: DE97006897
Country of Publication:
United States
Language:
English

Similar Records

Compliant interlayer for advanced ceramic/metal engine components
Journal Article · Sat Dec 31 23:00:00 EST 1994 · Automotive Engineering; (United States) · OSTI ID:6460265

Fracture behavior of chemically-vapor-deposited SiC-coated graphite: Experimental results
Journal Article · Tue Nov 30 23:00:00 EST 1993 · Journal of the American Ceramic Society; (United States) · OSTI ID:5491935

Thermal-hydraulic modeling of porous bed reactors
Conference · Wed Dec 31 23:00:00 EST 1986 · Trans. Am. Nucl. Soc.; (United States) · OSTI ID:7100605