REVIEW OF RECENT DEVELOPMENTS IN THE TECHNOLOGY OF BERYLLIUM
Technical Report
·
OSTI ID:4842555
Reports and articles on the technology of beryllium received by DMIC during May, June, and July, 1961 are reviewed. It was found that a fast cooling rate is necessary for producing fine-grained, sound, cast beryllium ingots. An effect from impurities on the critical resolved shear stress for beryllium was shown to exist. Studies were made of surface damage and mechanical properties of beryllium. The effects of water vapor on corrosion by carbon dioxide were determined. Analysis showed thnt the reaction products were BeO and Be2C. (M.C.G.)
- Research Organization:
- Battelle Memorial Inst. Defense Metals Information Center, Columbus, Ohio
- NSA Number:
- NSA-15-029696
- OSTI ID:
- 4842555
- Report Number(s):
- DMIC-Memo-123
- Country of Publication:
- Country unknown/Code not available
- Language:
- English
Similar Records
Casting large beryllium ingots
BERYLLIUM CASTING, PHASE II. Final Report, September 19, 1958-December 15, 1960
REVIEW OF RECENT DEVELOPMENTS IN THE TECHNOLOGY OF COLUMBIUM AND TANTALUM
Technical Report
·
Mon Jun 05 00:00:00 EDT 1978
·
OSTI ID:6797807
BERYLLIUM CASTING, PHASE II. Final Report, September 19, 1958-December 15, 1960
Technical Report
·
Mon Oct 30 23:00:00 EST 1961
·
OSTI ID:4059384
REVIEW OF RECENT DEVELOPMENTS IN THE TECHNOLOGY OF COLUMBIUM AND TANTALUM
Technical Report
·
Sat Jul 01 00:00:00 EDT 1961
·
OSTI ID:4019508