Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Reactor vessel lower head integrity

Conference ·
OSTI ID:467942

On March 28, 1979, the Three Mile Island Unit 2 (TMI-2) nuclear power plant underwent a prolonged small break loss-of-coolant accident that resulted in severe damage to the reactor core. Post-accident examinations of the TMI-2 reactor core and lower plenum found that approximately 19,000 kg (19 metric tons) of molten material had relocated onto the lower head of the reactor vessel. Results of the OECD TMI-2 Vessel Investigation Project concluded that a localized hot spot of approximately 1 meter diameter had existed on the lower head. The maximum temperature on the inner surface of the reactor pressure vessel (RPV) in this region reached 1100{degrees}C and remained at that temperature for approximately 30 minutes before cooling occurred. Even under the combined loads of high temperature and high primary system pressure, the TMI-2 RPV did not fail. (i.e. The pressure varied from about 8.5 to 15 MPa during the four-hour period following the relocation of melt to the lower plenum.) Analyses of RPV failure under these conditions, using state-of-the-art computer codes, predicted that the RPV should have failed via local or global creep rupture. However, the vessel did not fail; and it has been hypothesized that rapid cooling of the debris and the vessel wall by water that was present in the lower plenum played an important role in maintaining RPV integrity during the accident. Although the exact mechanism(s) of how such cooling occurs is not known, it has been speculated that cooling in a small gap between the RPV wall and the crust, and/or in cracks within the debris itself, could result in sufficient cooling to maintain RPV integrity. Experimental data are needed to provide the basis to better understand these phenomena and improve models of RPV failure in severe accident codes.

Research Organization:
Nuclear Regulatory Commission, Washington, DC (United States). Office of Nuclear Regulatory Research; Brookhaven National Lab., Upton, NY (United States)
OSTI ID:
467942
Report Number(s):
NUREG/CP--0157-VOL.2; CONF-9610202--Vol.2; ON: TI97004274
Country of Publication:
United States
Language:
English

Similar Records

Cooling mechanisms at the bottom of relocated porous debris
Journal Article · Sun Nov 30 23:00:00 EST 1997 · Transactions of the American Nuclear Society · OSTI ID:552518

A scaling and experimental approach for investigating in-vessel cooling
Conference · Fri Jan 31 23:00:00 EST 1997 · OSTI ID:467943

Cooling of core debris within the reactor vessel lower head
Conference · Mon Dec 31 23:00:00 EST 1990 · Transactions of the American Nuclear Society; (United States) · OSTI ID:5854481