Mini ball grid array (mBGA) assembly on MCM-L boards
Sandia National Laboratories has developed a chip scale packaging technology called mini Ball Grid Array (mBGA). The mBGA is a flip chip die, obtained by redistributing peripheral pads in existing dies to an area array of pads 10 mils or larger in diameter with a minimum pitch of 20 mils. The peripheral pads are redistributed to area array pads using two polyimide dielectric and two metal conductor layers. mBGA can be closely tiled together on a substrate to yield a very high circuit density. In an earlier report, the authors presented the results on the reliability and thermal performance of mBGA on silicon and ceramic substrates. In this report, they present an mBGA cost analysis, improvements in the mBGA bump adhesion, and reliability and thermal performance of mBGA assemblies on FR-4 boards.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 463644
- Report Number(s):
- SAND--97-0314C; CONF-970569--1; ON: DE97003008
- Country of Publication:
- United States
- Language:
- English
Similar Records
Silicon ball grid array chip carrier
Areal array jetting device for ball grid arrays