skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Influence of yttria content on the preparation of nanocrystalline yttria-doped zirconia

Journal Article · · Journal of Materials Research
; ;  [1]
  1. Institute for Self-Propagating High-Temperature Synthesis, New York State College of Ceramics at Alfred University, Alfred, New York, 14802 (United States)

Nanocrystalline zirconia doped with 0--10 mol % Y{sub 2}O{sub 3} has been prepared by a combustion synthesis process, followed by a rapid densification process. The concentration of Y{sub 2}O{sub 3} in the as-reacted zirconia appeared to have a significant influence on the reduction of the crystallite size, in the combustion temperature range studied (450 {degree}C--550 {degree}C), as well as on the stabilization of the tetragonal and/or cubic phases. The green compacts were densified by a fast-firing process. During fast-firing, the dwell temperature significantly affected the final average grain size and the final density of the article. On the other hand, the ranges of heating rates and dwell times that were used in this study were shown to have a much less significant effect on the article`s final density and final average grain size. The yttria content had the largest influence on the final density and final average grain size. The densification took place much more rapidly in the 4 mol % Y{sub 2}O{sub 3}--ZrO{sub 2} samples than in the 10 mol % Y{sub 2}O{sub 3}--ZrO{sub 2} samples. In particular, the difference in densification rates between the samples with different Y{sub 2}O{sub 3} content was attributed to the influence and magnitude of the associated grain-growth process. It was determined, however, that a high final density ({gt}99% {rho}{sub th}) and a very fine final average grain size ({lt}200 nm) could be simultaneously achieved with each of three different heating rates for the 4 mol % Y{sub 2}O{sub 3}--ZrO{sub 2} articles.

Sponsoring Organization:
USDOE
DOE Contract Number:
FG02-93ER12128
OSTI ID:
46339
Journal Information:
Journal of Materials Research, Vol. 10, Issue 3; Other Information: PBD: Mar 1995
Country of Publication:
United States
Language:
English

Similar Records

Preparation of nanocrystalline yttria-stabilized zirconia
Journal Article · Wed Mar 01 00:00:00 EST 1995 · Journal of Materials Research · OSTI ID:46339

Rapid rate sintering of nanocrystalline ZrO{sub 2}-3 mol% Y{sub 2}O{sub 3}
Journal Article · Mon Apr 01 00:00:00 EST 1996 · Journal of the American Ceramic Society · OSTI ID:46339

Electrical properties of ultrafine-grained yttria-stabilized zirconia ceramics
Journal Article · Mon Sep 01 00:00:00 EDT 1997 · Journal of Materials Research · OSTI ID:46339