Control of sinter quality for blast furnaces of SAIL through characterization of high temperature properties
- Steel Authority of India Limited, Bihar (India). Research and Development Centre
Quality of blast furnace (BF) burden materials and their performance inside the furnace have attracted increased importance worldwide. High productivity, low fuel rate and stable operation of BF can be achieved by suitably controlling the quality of input materials particularly that of sinter which is the main constituent of the burden. Reduction Degradation Index (RDI), Reducibility Index (RI) and Softening-melting characteristics are some of the quality indicators of sinter. The effect of chemical composition of sinter in the ranges of CaO/SiO{sub 2} 1.4--2.0, FeO 4.0--8.0, Al{sub 2}O{sub 3} 1.3--2.0 and MgO 1.2--2.0 on the above mentioned properties have been reported in literature. Due to the peculiarity of Indian raw materials, i.e., high ash content of coke and high Al{sub 2}O{sub 3} content of iron ore, the sinter composition varies over a wide range of CaO/SiO{sub 2} 2.0--2.5, FeO 8--11%, Al{sub 2}O{sub 3} 2--4% and MgO 2--5% in different plants of SAIL. This paper discusses the effect of above constituents in higher ranges as compared to earlier study on RDI, RI and Softening-melting properties so that sinter composition can be optimized for achieving desirable properties for better BF performance.
- OSTI ID:
- 460651
- Report Number(s):
- CONF-960317-; ISBN 1-886362-12-2; TRN: IM9718%%233
- Resource Relation:
- Conference: 79. steelmaking and 55th ironmaking conference, Pittsburgh, PA (United States), 24-27 Mar 1996; Other Information: PBD: 1996; Related Information: Is Part Of Ironmaking conference proceedings: Volume 55; PB: 807 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Assessment of Physicochemical Properties of Electrical Arc Furnace Slag and Their Effects on Foamability
Reactions in the Tuyere Zone of Ironmaking Blast Furnace