The effect of additives on lime dissolution rates. Final report
Based on the previous years` studies concerning the efficiency of SO{sub 2} removal by spray dryers with high sulfur coal flue gas, the work for year five included investigations of lime dissolution rates at different slaking conditions and with the effect of additives. The prominent additives that have significant effects on lime dissolution rates were tested with the mini pilot spray drying absorber to see their effects on spray drying desulfurization applications. The mechanisms of these additive effects along with the properties of hygroscopic additives have been discussed and incorporated into the spray drying desulfurization model ``SPRAYMOD-M.`` Slaking conditions are very important factors in producing high quality lime slurry in spray drying desulfurization processes. At optimal slaking conditions, the slaked lime particles are very fine (3-5{mu}m) and the slaked lime has high BET surface areas which are beneficial to the desulfurization. The slaked lime dissolution rate experiments in our study are designed to determine how much lime can dissolve in a unit time if the initial lime surface area is kept constant. The purpose of the dissolution rate study for different additives is to find those effective additives that can enhance lime dissolution rates and to investigate the mechanisms of the dissolution rate enhancement properties for these additives. The applications of these additives on spray drying desulfurization are to further verify the theory that dissolution rate is a rate limiting step in the whole spray drying desulfurization process as well as to test the feasibility of these additives on enhancing SO{sub 2} removal in spray dryers.
- Research Organization:
- Cincinnati Univ., OH (United States)
- Sponsoring Organization:
- Ohio State Government, Columbus, OH (United States)
- OSTI ID:
- 459758
- Report Number(s):
- OCDO--97001488; ON: TI97001488
- Country of Publication:
- United States
- Language:
- English
Similar Records
Limitation of sulfur dioxide removal in a FGD spray dryer using once through slaked lime
The effect of additives on lime dissolution rates. Final report, September 1, 1993--August 31, 1994
Modeling of SO/sub 2/ removal in spray-dryer flue-gas desulfurization system. Final report, November 1983-June 1984
Thesis/Dissertation
·
Thu Dec 31 23:00:00 EST 1987
·
OSTI ID:6950992
The effect of additives on lime dissolution rates. Final report, September 1, 1993--August 31, 1994
Technical Report
·
Tue Jan 31 23:00:00 EST 1995
·
OSTI ID:57876
Modeling of SO/sub 2/ removal in spray-dryer flue-gas desulfurization system. Final report, November 1983-June 1984
Technical Report
·
Sat Nov 30 23:00:00 EST 1985
·
OSTI ID:6089045