Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Monte Carlo calculation of point detector sensitivities to cross sections

Conference ·
OSTI ID:459268
Hall`s Differential Operator Method for the Monte Carlo calculation of sensitivities was extended so as to apply to point-detector-type problems. By this method the evaluation of the sensitivities of the detector response (or, equivalently, those of the neutron flux at the detector) to the cross sections of interest is concurrent with that of the very response. In such a Monte Carlo game, the neutron histories, or paths, are sampled, collision by collision, and the calculated contributions of each collision to the response and to its partial derivatives with respect to the relevant cross sections are accumulated. For each path these sums are the estimates for the response and its sensitivities. The Monte Carlo evaluations are then the respective averages of the individual path estimates. This scheme was applied to the analysis of the time-of-flight spectra of the leakage from the Livermore aluminum and carbon pulsed spheres. Measured and calculated spectra and some of their sensitivities are depicted, as an illustration, and discussed.
OSTI ID:
459268
Report Number(s):
CONF-950420--
Country of Publication:
United States
Language:
English

Similar Records

Monte Carlo calculation of point-detector sensitivities to material parameters
Journal Article · Sun Sep 01 00:00:00 EDT 1996 · Nuclear Science and Engineering · OSTI ID:379816

Monte Carlo Method for Array Criticality Calculations
Conference · Sun Jun 13 00:00:00 EDT 1976 · Transactions of the American Nuclear Society · OSTI ID:7337658

Monte Carlo method for array criticality calculations
Journal Article · Sun Aug 01 00:00:00 EDT 1976 · Nucl. Technol.; (United States) · OSTI ID:7354986