Cavitation corrosion of duplex stainless steel in seawater
- Kuwait Inst. for Scientific Research, Safat (Kuwait)
A laboratory study was conducted on the cavitation corrosion behavior of a commercial cast duplex stainless steel (DSS) in seawater using an ultrasonically-induced cavitation facility. Mass loss, free-corrosion potential, potentiodynamic polarization, and microscopic examinations were compared in the absence and presence of cavitation. The rate of mass loss was negligible in quiescent seawater. However, the rate was 0.64 mg/h-cm{sup 2} after testing for 11 h in the presence of cavitation. Cathodic protection (CP) reduced the rate of mass loss by 19%. Cavitation caused an active shift in the free-corrosion potential by {approximately}140 mV. During polarization in the absence and presence of cavitation, the alloy passivated spontaneously without an active-to-passive transition. Cavitation slightly increased the cathodic and anodic currents, shifted the corrosion potential in the noble direction by 75 mV, and decreased the breakdown potential by {approximately}50 mV. Under the free-corrosion condition, small cavities initiated in the ferrite matrix and at the ferrite-austenite boundaries. With the progress of cavitation, the attack concentrated in the austenite phase but spread to the ferrite phase and was associated with ductile tearing, cleavage-like facets, river patterns, and crystallographic steps at later stages. CP decreased the number of cavities slightly. Specimen cross sections revealed microcracks initiating from the ferrite matrix at the bottom of cavities. Crack propagation into the bulk of the material was impeded by the austenite islands and branched along parallel slip systems.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 449635
- Journal Information:
- Corrosion, Journal Name: Corrosion Journal Issue: 2 Vol. 53; ISSN 0010-9312; ISSN CORRAK
- Country of Publication:
- United States
- Language:
- English
Similar Records
The effect of tungsten and molybdenum additions on the cavitation corrosion behavior of duplex stainless steel (DSS) in seawater
Cavitation corrosion behavior of cast nickel-aluminium bronze in seawater