Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Power generation by combined fuel cell and gas turbine systems

Conference ·
OSTI ID:435563
 [1]; ;  [2]
  1. Carnegie Mellon Univ., Pittsburgh, PA (United States)
  2. Dept. of Energy, Morgantown, WV (United States). Morgantown Energy Technology Center

In general, the oxidation of H{sub 2}, CO, CH{sub 4}, and higher hydrocarbons in fuel cells to produce power also produces reject heat. This heat arises from two sources: the entropy decrease, {Delta}S, resulting from the overall oxidation reaction--accompanying the usual decrease in the number of moles of gas, from reactants to products; and the loss in work, or a conversion of reversible work from the oxidation process to heat, due to irreversible processes occurring in the operation of the cell. Heat from these two sources must be rejected from the fuel cell in order to maintain its temperature at a desired level. The heat can be removed and recovered by transferring it across a bounding surface to a heat transfer fluid, but care must be taken to maintain the cell at its desired temperature in this and adjacent regions. Alternatively, heat can be removed in one of the reactant streams passing through the cell--most practically the air, oxidant stream. Also in the operation of a practical fuel cell, some unburned fuel must remain in the combustion products leaving the cell in order to maintain a significant generated voltage throughout the cell. In order to obtain the highest possible efficiency in electrical generation both the thermal energy in the heat and the unburned fuel rejected from the cell must be recovered and converted into additional electrical energy. This can be accomplished by means of a heat engine cycle making use of a gas turbine operating in a regenerative Brayton or combined Brayton-Rankine cycle or a steam turbine operating in a Rankine cycle. The relative merits of these three heat engine cycles depends on their overall efficiencies and on the practical aspects of integration, operation, and cost of the power generation plant as a whole.

OSTI ID:
435563
Report Number(s):
CONF-960805--
Country of Publication:
United States
Language:
English

Similar Records

A Waste Heat Recovery System for Light Duty Diesel Engines
Journal Article · Thu Dec 31 23:00:00 EST 2009 · Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering · OSTI ID:992104

Westinghouse fuel cell combined cycle systems
Conference · Mon Dec 30 23:00:00 EST 1996 · OSTI ID:462890

Turbine engine with exhaust gas recirculation
Patent · Tue May 27 00:00:00 EDT 1980 · OSTI ID:5557963