Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Three-dimensional modeling of flow through fractured tuff at Fran Ridge

Technical Report ·
DOI:https://doi.org/10.2172/432354· OSTI ID:432354
Numerical studies have been made of an infiltration experiment at Fran Ridge using the TOUGH2 code to aid in the selection of computational models for performance assessment. The exercise investigates the capabilities of TOUGH2 to model transient flows through highly fractured tuff and provides a possible means of calibration. Two distinctly different conceptual models were used in the TOUGH2 code, the dual permeability model and the equivalent continuum model. The infiltration test modeled involved the infiltration of dyed ponded water for 36 minutes. The 205 gallon infiltration of water observed in the experiment was subsequently modeled using measured Fran Ridge fracture frequencies, and a specified fracture aperture of 285 {micro}m. The dual permeability formulation predicted considerable infiltration along the fracture network, which was in agreement with the experimental observations. As expected, al fracture penetration of the infiltrating water was calculated using the equivalent continuum model, thus demonstrating that this model is not appropriate for modeling the highly transient experiment. It is therefore recommended that the dual permeability model be given priority when computing high-flux infiltration for use in performance assessment studies.
Research Organization:
Sandia National Labs., Albuquerque, NM (United States)
Sponsoring Organization:
USDOE Office of Civilian Radioactive Waste Management, Washington, DC (United States)
DOE Contract Number:
AC04-94AL85000
OSTI ID:
432354
Report Number(s):
SAND--95-1896(9/96); ON: DE97000874
Country of Publication:
United States
Language:
English