Simulation error propagation for a dynamic rod worth measurement technique
- North Carolina State Univ., Raleigh, NC (United States)
KRSKO nuclear station, subsequently adapted by Westinghouse, introduced the dynamic rod worth measurement (DRWM) technique for measuring pressurized water reactor rod worths. This technique has the potential for reduced test time and primary loop waste water versus alternatives. The measurement is performed starting from a slightly supercritical state with all rods out (ARO), driving a bank in at the maximum stepping rate, and recording the ex-core detectors responses and bank position as a function of time. The static bank worth is obtained by (1) using the ex-core detectors` responses to obtain the core average flux (2) using the core average flux in the inverse point-kinetics equations to obtain the dynamic bank worth (3) converting the dynamic bank worth to the static bank worth. In this data interpretation process, various calculated quantities obtained from a core simulator are utilized. This paper presents an analysis of the sensitivity to the impact of core simulator errors on the deduced static bank worth.
- OSTI ID:
- 426531
- Report Number(s):
- CONF-961103--
- Journal Information:
- Transactions of the American Nuclear Society, Journal Name: Transactions of the American Nuclear Society Vol. 75; ISSN TANSAO; ISSN 0003-018X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Dynamic Rod Worth Measurement
A Benchmark for Investigating the Radial Dependence of C/E for Control Rod Worths in Large Decoupled Cores