Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

PREFERRED ORIENTATION IN ROLLED AND IN RECRYSTALLIZED HIGH-PURITY URANIUM ROD. Final Report of Metallurgy Program.4.1.17

Technical Report ·
DOI:https://doi.org/10.2172/4245740· OSTI ID:4245740

The preferred orientation of a relatively small piece of high-purity uranium rod, rolled to an 85% reduction at 300 deg C, has been determined in the as-rolled and in the recrystallized conditions. The 12 different charts obtained indicated that the as-rolled texture could be described as a duplex (041) and (352) with the (041) being the major component and with considerable spread about each component. The recrystallized rod showed approximate (041) and (392) components with considerable spread. These texture components for both the as- rolled and the recrystallized rods are not too different from those previously reported for reactor-grade uranium rod. However, it was noted that the texture appeared to be quite sharp for the reduction used, and the maximum intensity on an inverse pole figure was considerably displaced from the periphery of an (001) standard projection for both the rolled and recrystallized rods. (auth)

Research Organization:
Argonne National Lab., Lemont, Ill.
DOE Contract Number:
W-31109-ENG-38
NSA Number:
NSA-13-011818
OSTI ID:
4245740
Report Number(s):
ANL-5887
Country of Publication:
United States
Language:
English

Similar Records

PREFERRED ORIENTATION IN ROLLED URANIUM RODS
Journal Article · Sun Nov 30 23:00:00 EST 1958 · Trans. Met. Soc. AIME · OSTI ID:4284520

PREFERRED ORIENTATION IN THORIUM
Technical Report · Fri Oct 30 23:00:00 EST 1959 · OSTI ID:4250052

Quantitative determination of rolling and recrystallization textures in 600°C-and 300°C-rolled uranium rods.
Technical Report · Sun Jun 01 00:00:00 EDT 1952 · OSTI ID:12462444