Parallel Assembly of LIGA Components
Conference
·
OSTI ID:4241
- Sandia National Laboratories
In this paper, a prototype robotic workcell for the parallel assembly of LIGA components is described. A Cartesian robot is used to press 386 and 485 micron diameter pins into a LIGA substrate and then place a 3-inch diameter wafer with LIGA gears onto the pins. Upward and downward looking microscopes are used to locate holes in the LIGA substrate, pins to be pressed in the holes, and gears to be placed on the pins. This vision system can locate parts within 3 microns, while the Cartesian manipulator can place the parts within 0.4 microns.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (US); Sandia National Labs., Livermore, CA (US)
- Sponsoring Organization:
- US Department of Energy (US)
- OSTI ID:
- 4241
- Report Number(s):
- SAND99-0543C
- Country of Publication:
- United States
- Language:
- English
Similar Records
Micro-grippers for assembly of LIGA parts
Ultra-Precise Assembly of Micro-Electromechanical Systems (MEMS) Components
Diamond-like nanocomposite coatings for LIGA-fabricated nickel alloy parts.
Conference
·
Tue Dec 30 23:00:00 EST 1997
·
OSTI ID:292855
Ultra-Precise Assembly of Micro-Electromechanical Systems (MEMS) Components
Technical Report
·
Wed Mar 31 23:00:00 EST 1999
·
OSTI ID:5833
Diamond-like nanocomposite coatings for LIGA-fabricated nickel alloy parts.
Technical Report
·
Mon Feb 28 23:00:00 EST 2005
·
OSTI ID:922774