JOINING OF BERYLLIUM
Technical Report
·
OSTI ID:4240748
Beryllium is a brittle metal and consequently is difficult to fabricate and join. Limited success has been reported on direct welding by tungsten-arc, pressure, and electron-beam processes. Cracking is the major problem encountered. Resistance spot welds have been made, but little is known about the properties of these welds. Good joints have been made by braze welding with aluminum filler and brazing with silver and the silver-copper eutectic alloy. Improvements in base metal and in joining techniques are required. (auth)
- Research Organization:
- Battelle Memorial Inst. Defense Metals Information Center, Columbus, Ohio
- NSA Number:
- NSA-13-012660
- OSTI ID:
- 4240748
- Report Number(s):
- DMIC-Memo-13
- Country of Publication:
- Country unknown/Code not available
- Language:
- English
Similar Records
Welding and Brazing of Beryllium to Itself and to Other Metals
BERYLLIUM JOINING WADC SPONSORED PROGRAM. Quarterly Progress Report No. 2
WELDING OF BERYLLIUM. METHODS STUDIED AND THE RESULTS OBTAINED DURING THE INITIAL INVESTIGATION OF BERYLLIUM JOINING BY VARIOUS METHODS ARE PRESENTED
Technical Report
·
Thu May 28 00:00:00 EDT 1953
·
OSTI ID:4379837
BERYLLIUM JOINING WADC SPONSORED PROGRAM. Quarterly Progress Report No. 2
Technical Report
·
Mon Jan 12 23:00:00 EST 1959
·
OSTI ID:4240643
WELDING OF BERYLLIUM. METHODS STUDIED AND THE RESULTS OBTAINED DURING THE INITIAL INVESTIGATION OF BERYLLIUM JOINING BY VARIOUS METHODS ARE PRESENTED
Journal Article
·
Thu Oct 01 00:00:00 EDT 1959
· Welding J. (N.Y.)
·
OSTI ID:4217553