Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Solid-state sodium batteries using polymer electrolytes and sodium intercalation electrode materials

Technical Report ·
DOI:https://doi.org/10.2172/414308· OSTI ID:414308
 [1]
  1. Univ. of California, Berkeley, CA (United States). Dept. of Materials Science and Mineral Engineering

Solid-state sodium cells using polymer electrolytes (polyethylene oxide mixed with sodium trifluoromethanesulfonate: PEO{sub n}NaCF{sub 3}SO{sub 3}) and sodium cobalt oxide positive electrodes are characterized in terms of discharge and charge characteristics, rate capability, cycle life, and energy and power densities. The P2 phase Na{sub x}CoO{sub 2} can reversibly intercalate sodium in the range of x = 0.3 to 0.9, giving a theoretical specific energy of 440 Wh/kg and energy density of 1,600 Wh/l. Over one hundred cycles to 60% depth of discharge have been obtained at 0.5 mA/cm{sup 2}. Experiments show that the electrolyte/Na interface is stable and is not the limiting factor to cell cycle life. Na{sub 0.7}CoO{sub 2} composite electrodes containing various amounts of carbon black additive are investigated. The transport properties of polymer electrolytes are the critical factors for performance. These properties (the ionic conductivity, salt diffusion coefficient, and ion transference number) are measured for the PEO{sub n}NaCF{sub 3}SO{sub 3} system over a wide range of concentrations at 85 C. All the three transport properties are very salt-concentration dependent. The ionic conductivity exhibits a maximum at about n = 20. The transference number, diffusion coefficient, and thermodynamic factor all vary with salt concentration in a similar fashion, decreasing as the concentration increases, except for a local maximum. These results verify that polymer electrolytes cannot be treated as ideal solutions. The measured transport-property values are used to analyze and optimize the electrolytes by computer simulation and also cell testing. Salt precipitation is believed to be the rate limiting process for cells using highly concentrated solutions, as a result of lower values of these properties, while salt depletion is the limiting factor when a dilute solution is used.

Research Organization:
Lawrence Berkeley National Lab., CA (United States)
Sponsoring Organization:
USDOE Office of Energy Research, Washington, DC (United States)
DOE Contract Number:
AC03-76SF00098
OSTI ID:
414308
Report Number(s):
LBNL--39127; ON: DE97001598
Country of Publication:
United States
Language:
English

Similar Records

Effect of electrolyte composition on the performance of sodium/polymer cells
Journal Article · Fri Jan 31 23:00:00 EST 1997 · Journal of the Electrochemical Society · OSTI ID:465081

The measurement of a complete set of transport properties for a concentrated solid polymer electrolyte solution
Journal Article · Thu Jun 01 00:00:00 EDT 1995 · Journal of the Electrochemical Society · OSTI ID:82915

Rechargeable Na/Na[sub x]CoO[sub 2] and Na[sub 15]Pb[sub 4]/Na[sub x]CoO[sub 2] polymer electrolyte cells
Journal Article · Fri Oct 01 00:00:00 EDT 1993 · Journal of the Electrochemical Society; (United States) · OSTI ID:5800574