REPROCESSING OF LOW-ENRICHMENT URANIUM-MOLYBDENUM ALLOY FUELS
Procedures for the dissolution of U-Mo alloy fuels to prepare feed solutions for low-acid (Redox) type solvent extraction processing are presented. U-Mo alloys can be dissolved in boiling ferric nitrate--ritric acid solutions to higher terminal urarium concentrations and lower terminal acidities without precipitation of uranyl molybdate than in nitric acid alone. Anion resin exchange studies indicate the presence of negatively charged iron-molybdenum complex ions in the solutions. The U-Mo alloys also dissolve more rapidly in ferric nitrate--nitnic acid solutions than in nitric acid alone; dissolution rate data are given. Curves delineating free acid, uranium, snd iron (III) concentrations within which solutions stable towards solids formation can be prepared from U-3 wt.% Mo and U-10 wt.% Mo alloys are presented. Stability during prolonged storage of uranium--molybdenum-ferric nitrate--nitric acid solutions is discussed. Data on the oxidation of plutonium in these solutions and on further neutralization of the solutions are presented. Fission product decontamination and product recovery obtained in solvent extraction studies simulating the Redox process are discussed. (auth)
- Research Organization:
- General Electric Co. Hanford Atomic Products Operation, Richland, Wash.
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AT(45-1)-1350
- NSA Number:
- NSA-14-016717
- OSTI ID:
- 4136192
- Report Number(s):
- HW-62086
- Country of Publication:
- United States
- Language:
- English
Similar Records
REPROCESSING URANIUM-MOLYBDENUM ALLOY FUELS-DISSOLUTION IN CONCENTRATED NITRIC ACID
DISSOLUTION OF POWER REACTOR FUEL CORES