Low activity blankets for experimental power reactors
Results of current studies aimed at the development of low activity blankets for Tokamak experimental power reactors are presented. First wall loadings in the range of 0.5 to 1.0 MW(th)/m$sup 2$ have been assumed. Blanket designs are developed for both circular plasma reactors (R = 6.25m, a = 2.1m) and non-circular plasma reactors (R = 4.0m, a = 1.0m, b = 3.0m). For each of these two reactor choices, two blanket options are described. 1) In the first option, the blanket is thick graphite block structure (approximately 50cm thickness) with SAP coolant tubes carrying helium imbedded deep within the graphite to minimize radiation damage. The neutron and gamma energy deposited in the graphite is radiated along internal slots to the coolant tubes where approximately 80 percent of the fusion energy is carried off by He at 380$sup 0$C. The remaining 20 percent of the fusion energy is removed by a separate He stream at a slightly lower temperature. The maximum graphite surface temperature is relatively low (approximately 1700$sup 0$C at 1 MW(th)/m2). 2) In the second blanket option, the blanket is composed of aluminum modules. The aluminum shell (5000 series alloy) is maintained at a low temperature (approximately 200$sup 0$C) by a water coolant stream. Approximately 40 percent of the fusion energy is removed in this circuit. The remaining 60 percent of the fusion energy is deposited in a thermally insulated hot interior (SiC and B$sub 4$C) where it is transferred to a separate He coolant, with exit temperature of 700$sup 0$C. (auth)
- Research Organization:
- Brookhaven National Lab., Upton, N.Y. (USA)
- NSA Number:
- NSA-33-014515
- OSTI ID:
- 4127067
- Report Number(s):
- BNL--20717; CONF-751125--134
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fusion blankets for catalyzed D--D and D--/sup 3/He reactors
Fusion blankets for catalyzed D--D and D--He/sup 3/ reactors