Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

FUNDAMENTAL AND APPLIED RESEARCH AND DEVELOPMENT IN METALLURGY, PROGRESS REPORT TO THE UNITED STATES ATOMIC ENERGY COMMISSION FOR APRIL, 1961

Technical Report ·
OSTI ID:4048858
Honeycomb-type Fuel Elements. An Al-clad Al--16 wt% U plate with 36 Al-- 0.8 wt% Mg core inserts was rolled. The equipment for punching fuel plates and plugging the holes with core inserts is described. Attempts to form the fuel plate into a spiral are described. Yttrium Fabrication. The results of extrusion of Y billets and tube drawing and swaging experiments are reported. Metallographic examination of Zircaloy-2-clad Y after heat treatment at 900 and 1000 deg C for times up to 225 hr gave no evidence of ZircaloyY reaction. U/sup 233/ Recycle. The conclusions reached by a series of meetings on problem areas are briefly summarized. They treat input fuel shipment, fuel shielding, and fuel allocation of core loadings for efficient use of irradiated U/sup 233/. Hydrostatic Fabrication. The results of extrusion of Be billets into rods, using water as the pressure medium, are reported. Corrosion of Zirconium Alloys. The behavior of Zr intermetallic compounds with H/sub 2/ and O/sub 2/ is described. Oxygen gradients in corroding Zr alloy samples exposed to steam were investigated. Crack formation in the oxide films was studied. (D.J.C.)
Research Organization:
Nuclear Metals, Inc., Concord, Mass.
NSA Number:
NSA-15-023951
OSTI ID:
4048858
Report Number(s):
NMI-2096
Country of Publication:
United States
Language:
English