Thermal stress analysis of pipe flange connections with raised-face gasket subjected to heat conduction

Conference · Sun Dec 01 04:00:00 EST 1996

OSTI ID:404152

Sawa, Toshiyuki; Kotani, Kenichi ^[1]

---

1. Yamanashi Univ., Kofu, Yamanashi (Japan). Dept. of Mechanical Engineering

This paper deals with thermal stress analysis of a pipe flange connection with a raised-face gasket subjected to heat conduction. In the analysis, pipe flange, hubs of the flanges and a raised-face gasket are replaced by finite hollow cylinders. When the inner surface is subjected to heat conduction due to contained fluid and the outer surface are kept at a constant temperature, temperature distribution of the connection is analyzed. Using the temperature distribution, thermoelastic displacement potential is determined. Thermal stresses and displacements are analyzed by using the thermoelastic displacement potential and axisymmetrical theory of elasticity. Experiments are performed. The analytical results are in fairly good agreement with the experimental results concerning the variation of axial bolt force and the axial strain at the hubs of pipe flange. In the numerical calculations, the effects of the ratios of Young`s modulus and the gasket thickness between the flanges and the gaskets on the contact stress distribution are examined. As the results, it is seen that the thermal stress at the inner surface increases with a decrease of the ratio of Young`s modulus and that it increases with a decrease of the gasket thickness.

• OSTI ID: 404152
• Report Number(s): CONF-960706--; ISBN 0-7918-1773-3
• Country of Publication: United States
• Language: English

Related Subjects

42 ENGINEERING
BOLTED JOINTS
CHEMICAL INDUSTRY
FLANGES
GASKETS
NUCLEAR INDUSTRY
PIPE JOINTS
PIPES
STRESS ANALYSIS
THERMAL STRESSES