Removal of small particles on silicon wafer by laser-induced airborne plasma shock waves
It has been found that effective removal of small particles from silicon wafer surfaces can be achieved by laser-induced airborne plasma shock waves initiated above the surface. This process has demonstrated successfully the removal of 1 {mu}m sized tungsten particles from the surface. Tungsten is known to be one of the most difficult particles to remove using conventional laser cleaning techniques employing direct laser irradiation onto the surface. The area cleaned by the shock waves was over ten times larger than that achieved by conventional laser cleaning. This provides an advantage in speed for cleaning large areas. The cleaning efficiency was strongly dependent on the gap distance between the laser focus (where laser-induced sparking takes place) and the surface. The particle removal began to occur with a gap of 6 mm and the removal efficiency increased significantly with decreasing the gap resulting in a complete removal at 2 mm. The basic idea behind this new cleaning technique and how to apply it for the removal of small particles from surfaces are described. Theoretical considerations about adhesion forces of small particles on the surface and laser-induced shock wave generation are carried out to understand this process. {copyright} 2001 American Institute of Physics.
- Sponsoring Organization:
- (US)
- OSTI ID:
- 40203789
- Journal Information:
- Journal of Applied Physics, Vol. 89, Issue 11; Other Information: DOI: 10.1063/1.1353562; Othernumber: JAPIAU000089000011006496000001; 004108JAP; PBD: 1 Jun 2001; ISSN 0021-8979
- Publisher:
- The American Physical Society
- Country of Publication:
- United States
- Language:
- English
Similar Records
Study of Passivation in the Gap Region Between Contacts of Interdigitated-Back-Contact Silicon Heterojunction Solar Cells: Simulation and Voltage-Modulated Laser-Beam-Induced-Current
Enhancement of Optical Efficiency of CSP Mirrors for Reducing O&M Cost via Near-Continuous Operation of Self-Cleaning Electrodynamic Screens (EDS). Final Report