THE DESIGN STUDY AND THE GENERAL PICTURE OF THE LINEAR ELECTRON ACCELERATOR FOR THE INJECTOR OF 1 BeV SYNCHROTRON
Technical Report
·
OSTI ID:4006490
The design of a linear electron accelerator to be used as injector for a strong fccusing synchrotron-is described. The spread of the output energy was found to be caused by the different phase motions of the electrons injected at various phase angles and by variations in microwave power, frequency, and other perameters. These two effects were suppressed by careful design, especially on the buncher, and by the use of a prebuncher and a stable power system. An output energy spread of only a few percent was obtained at an energy of 6.5 Mev. (auth)
- Research Organization:
- Tokyo Univ. Inst. for Nuclear Study
- NSA Number:
- NSA-15-018882
- OSTI ID:
- 4006490
- Report Number(s):
- INS-27
- Country of Publication:
- Country unknown/Code not available
- Language:
- English
Similar Records
A Linear Electron Accelerator as the Injector of 1 BeV Synchrotron
THE CONSTRUCTION AND TEST OPERATION OF INS-LINEAR ELECTRON ACCELERATOR
SOME ASPECTS OF ELECTRON BEAM OPTICS AND X-RAY PRODUCTION WITH THE LINEAR ACCELERATOR
Journal Article
·
Sun Oct 15 00:00:00 EDT 1961
· Journal of the Physical Society of Japan
·
OSTI ID:4833409
THE CONSTRUCTION AND TEST OPERATION OF INS-LINEAR ELECTRON ACCELERATOR
Journal Article
·
Tue Oct 31 23:00:00 EST 1961
· J. Phys. Soc. Japan
·
OSTI ID:4804520
SOME ASPECTS OF ELECTRON BEAM OPTICS AND X-RAY PRODUCTION WITH THE LINEAR ACCELERATOR
Journal Article
·
Sat Mar 31 23:00:00 EST 1962
· IRE Trans. on Nuclear Sci.
·
OSTI ID:4799082