Mechanical stability of propped hydraulic fractures: A numerical study
- Itasca Consulting Group Inc., Minneapolis, MN (United States)
- Schlumberger Dowell, Tulsa, OK (United States). Applied Mechanics and Engineering Dept.
Proppant is sometimes produced along with hydrocarbons in hydraulically fractured petroleum wells. Sometimes 10% to 20% of the proppant is backproduced, which can lead to damaged equipment and downtime. Furthermore, proppant flowback can lead to a substantial loss of fracture conductivity. A numerical study was conducted to help understand what conditions are likely to lead to proppant flowback. In the simulations, the mechanical interaction of a larger number (several thousand) individual proppant grains was modeled with a distinct-element-type code. The numerical simulations show that hydraulic fractures propped with cohesionless, unbonded proppant fail under closure stress at a critical ratio of mean grain diameter to fracture width. This is consistent with published laboratory studies. The simulations identify the mechanism (arch failure) that triggers the mechanical instability and also show that the primary way that drawdowns (less than {approx} 75 psi/ft) affect proppant flowback is to transport loose proppant grains in front of the stable arch to the wellbore. Drawdowns > 75 psi/ft are sufficient to destabilize the arch and to cause progressive failure of the propped fractures.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 39891
- Journal Information:
- JPT, Journal of Petroleum Technology, Journal Name: JPT, Journal of Petroleum Technology Journal Issue: 3 Vol. 47; ISSN 0149-2136; ISSN JPTJAM
- Country of Publication:
- United States
- Language:
- English
Similar Records
Minimizing damage to a propped fracture by controlled flowback procedures
Direct observation of a sand-propped hydraulic fracture