Co-firing coal-water slurry in low-NOx burners: Experience at Penelec`s Seward Station
- Energy and Environmental Research Corp., Orrville, OH (United States)
- Pennsylvania Electric Co./GPU GENCO, Johnstown, PA (United States)
The electric utility industry is facing significant challenges for meeting environmental regulations for its coal fired generation units, and at the same time must stay cost competitive in an industry that is being deregulated. An emerging technology that can reduce environmental equipment costs, lower fuel costs, and help to mitigate the environment hazard of coal fine impoundments is the recovery and use of coal fines (< 100 mesh) in the form of a coal-water slurry (CWS). There are a number of issues to be addressed in the commercialization of this technology: coal fines recovery and beneficiation; CWS formulation and transportation; and storage, handling, and firing by the combustion equipment owner. This paper deals primarily with the utilization of coal-water slurry in utility boilers. Experience on a 32 MWe wall-fired boiler at the Pennsylvania Electric Company (Penelec) Seward Station indicates that CWS can be stored, handled, and co-fired with pulverized coal with only minimal modifications to the low-NO{sub x} coal burners and no modifications to the boiler. There was no degradation in combustion performance and NO{sub x} emissions were reduced approximately 20% when firing up to 35% of the total boiler heat input as coal-water slurry. Penelec contracted to purchase 2,500,000 gallons of CWS and are currently co-firing the fuel as it is produced and delivered. CWS fuel made form coal cleaning plant waste fines and from coal fines recovered from existing impoundments is expected to be available for less than $1.00/MMBtu.
- OSTI ID:
- 389890
- Report Number(s):
- CONF-960426--
- Country of Publication:
- United States
- Language:
- English
Similar Records
Utility applications for coal water slurry co-firing
Electric utility CWS firing options to reduce NOx emissions