Grain-boundary plane crystallography and energy in austenitic steel
- Univ. of Swansea (United Kingdom). Dept. of Materials Engineering
- Univ. Otto von Guericke Magdeburg (Germany). Inst. fuer Werkstofftechnik und Werkstoffpruefung
The presence of grain boundaries in polycrystalline materials affects the materials properties and performance. Recently it has been realized that boundaries can be manipulated to give better properties, and the design and control of grain boundaries is now an area of strong research interest in the search for high performance engineering materials. Grain boundaries can be classified using the Coincident Site Lattice Model (CSL), which defines the periodicity, i.e., the degree of fit between the two lattices which constitute the boundary. Using this model it is possible to divide boundaries into categories: low angle (up to 15{degree} misorientation), CSL and random i.e., high angle non-CSL. Some CSL boundaries have been shown to have special properties: an example from recent research in the same program as that currently reported has shown that twin boundaries ({Sigma} = 3 in CSL notation) in High Nitrogen Austenitic Stainless Steels do not favor the formation of Cr{sub 2}N precipitates. The research presented here examines grain boundary inclinations of surface grains in austenitic steel specimens which have been isothermally aged at higher 700 C or 800 C. Grain boundary plane crystallography has also been obtained for the 800 C aged sample.
- OSTI ID:
- 382483
- Journal Information:
- Scripta Materialia, Vol. 35, Issue 7; Other Information: PBD: 1 Oct 1996
- Country of Publication:
- United States
- Language:
- English
Similar Records
Grain-boundary characteristics in austenitic steel
On the significance of grain junction topology and crystallography in polycrystals