Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Simulation of convection and macrosegregation in a large steel ingot

Journal Article · · Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science
;  [1]
  1. Univ. of Iowa, Iowa City, IA (United States). Dept. of Mechanical Engineering

Melt convection and macrosegregation in casting of a large steel ingot are numerically simulated. The simulation is based on a previously developed model for multicomponent steel solidification with melt convection and involves the solution of fully coupled conservation equations for the transport phenomena in the liquid, mush, and solid. Heat transfer in the mold and insulation materials, as well as the formation of a shrinkage cavity at the top, is taken into account. The numerical results show the evolution of the temperature, melt velocity, and species concentration fields during solidification. The predicted variation of the macrosegregation of carbon and sulfur along the vertical centerline is compared with measurements from an industrial steel ingot that was sectioned and analyzed. Although generally good agreement is obtained, the neglect of sedimentation of free equiaxed grains prevents the prediction of the zone of negative macrosegregation observed in the lower part of the ingot. It is also shown that the inclusion of the shrinkage cavity at the top and the variation of the final solidification temperature due to macrosegregation is important in obtaining good agreement between the predictions and measurements.

Sponsoring Organization:
USDOE
OSTI ID:
363994
Journal Information:
Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Journal Name: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science Journal Issue: 5 Vol. 30; ISSN 1073-5623; ISSN MMTAEB
Country of Publication:
United States
Language:
English

Similar Records

Modeling of macrosegregation due to thermosolutal convection and contraction-driven flow in direct chill continuous casting of an Al-Cu round ingot
Journal Article · Sun Jun 01 00:00:00 EDT 1997 · Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science · OSTI ID:500911

Combined experimental and numerical investigation of the formation of macrosegregation during multicomponent steel solidification
Conference · Sat Dec 30 23:00:00 EST 1995 · OSTI ID:227789

Convective transport phenomena and macrosegregation during solidification of a binary metal alloy. II. Experiments and comparisons with numerical predictions
Journal Article · Mon Aug 01 00:00:00 EDT 1994 · Journal of Heat Transfer (Transactions of the ASME (American Society of Mechanical Engineers), Series C); (United States) · OSTI ID:6956308