Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Assessment of CHF enhancement mechanisms in a curved, rectangular channel subjected to concave heating

Journal Article · · Journal of Heat Transfer
DOI:https://doi.org/10.1115/1.2825992· OSTI ID:361755
;  [1]
  1. Purdue Univ., West Lafayette, IN (United States)

An experimental study was undertaken to examine the enhancement in critical heat flux (CHF) provided by streamwise curvature. Curved and straight rectangular flow channels were fabricated with identical 5.0 x 2.5 mm cross sections and heated lengths of 101.6 mm in which the heat was applied to only one wall--the concave wall (32.3 mm radius) in the curved channel and a side wall in the straight. Tests were conducted using FC-72 liquid with mean inlet velocity and outlet subcooling of 0.25 to 10 m s{sup {minus}1} and 3 to 29 C, respectively. Centripetal acceleration for curved flow reached 315 times earth`s gravitational acceleration. Critical heat flux was enhanced due to flow curvature at all conditions but the enhancement decreased with increasing subcooling. For near-saturated conditions, the enhancement was approximately 60% while for highly subcooled flow it was only 20%. The causes for the enhancement were identified as (1) increased pressure on the liquid-vapor interface at wetting fronts, (2) buoyancy forces and (3) increased subcooling at the concave wall. Flow visualization tests were conducted in transparent channels to explore the role of buoyancy forces in enhancing the critical heat flux. These forces were observed to remove vapor from the concave wall and distribute it throughout the cross section. Vapor removal was only effective at near-saturated conditions, yielding the observed substantial enhancement in CHF relative to the straight channel.

Sponsoring Organization:
USDOE, Washington, DC (United States); Department of the Air Force, Washington, DC (United States)
DOE Contract Number:
FG02-93ER14394
OSTI ID:
361755
Journal Information:
Journal of Heat Transfer, Journal Name: Journal of Heat Transfer Journal Issue: 2 Vol. 121; ISSN 0022-1481; ISSN JHTRAO
Country of Publication:
United States
Language:
English

Similar Records

Subcooled flow boiling over a thin, low-capacitance surface on a concave wall
Book · Sat Dec 30 23:00:00 EST 1995 · OSTI ID:445444

Experimental studies of boiling performance in curved channels with a two-phase approach flow
Book · Sat Dec 30 23:00:00 EST 1995 · OSTI ID:445440

A theoretical model for flow boiling CHF from short concave heaters
Journal Article · Tue Aug 01 00:00:00 EDT 1995 · Journal of Heat Transfer · OSTI ID:481208